en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Radiator Coolant Level / Changing Coolant

The changing coolant procedure is required only if the cooling system has been drained for maintenance and/or repair. Ensure vehicle is parked on a level surface before servicing.

  1. If only needing to check coolant level, there is a view 1 from the passenger side rear fender. A flashlight may be needed. The coolant level can also be viewed by removing the cargo box.

  2. To add coolant, begin by removing bottle access cover 2 in rear of vehicle (passenger side).

  3. Slowly remove the radiator pressure cap 3.

  4. Remove the pressure cap and use a funnel to add coolant as needed. Maintain the coolant level at the cold fill mark on the side of the pressure tank (only when the fluid has cooled, if after operation).

  5. Reinstall the pressure cap and the bottle access cover.

IMPORTANT
Use of a non-standard pressure cap will not allow the recovery system to function properly. Your authorized dealer can provide the correct replacement part.
IMPORTANT
If coolant must be added often, or if the pressure tank runs completely dry, there may be a leak in the system. Your authorized dealer can inspect the cooling system.
Parent topic: Cooling System