en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Oil Check

Always check the oil when the engine is cold and on a level surface. If the engine is hot when the oil is checked, the level will appear to be overfull.

Access the oil check dipstick 1 through the right rear wheel well. Access the oil fill cap 2 by removing the cargo box. See the Service Access Panels section for details.

  1. Position the vehicle on a level surface.

  2. Place the transmission in PARK.

  3. Start the engine. Allow the engine to idle for two-to-three (2-3) minutes.

  4. Stop the engine. Wait three (3) minutes before checking the oil level. This allows the oil to settle to the bottom of the crankcase. Do not check the oil level immediately after stopping the engine.

  5. Remove the dipstick. Wipe it dry with a clean cloth.

  6. Reinstall the dipstick completely. Remove the dipstick and check the oil level.

  7. Remove the oil fill cap to add the recommended oil as needed. Maintain the oil level between the minimum and maximum marks on the dipstick. Do not overfill.

  8. Reinstall the fill cap. Reinstall the dipstick.

Parent topic: Engine Oil