en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Transmission (Main Gearcase)

Always check and change the fluid at the intervals outlined in the Periodic Maintenance Chart section. Refer to the Gearcase Specifications Chart for recommended lubricants, capacities and torque specifications.

Fluid Check

The fill plug 1 is located on the right side of the gearcase. Maintain the fluid level at the bottom of the fill plug hole.

  1. Position the vehicle on a level surface.

  2. Remove the fill plug using a 8 mm Allen wrench.

  3. Check the fluid level. The fluid should be even with the bottom of the fill plug hole.

  4. If necessary, add the recommended fluid (listed in the Gearcase Specification Chart). Do not overfill.

  1. Reinstall the fill plug. Torque to specification.

    TORQUE

    Fill Plug Torque:

    10–14 ft-lbs (14–19 Nm)

  2. Clean any fluid residue from around the fill plug.

Fluid Change

The drain plug 2 is located on the bottom of the gearcase. Access the drain plug through the drain hole in the skid plate.

  1. Position the vehicle on a level surface.

  2. Remove the fill plug using a 8 mm Allen wrench.

  3. Place a drain pan under the drain plug.

  4. Remove the drain plug.

  5. Clean the drain plug.

  1. Reinstall the drain plug. Torque to specification.

    TORQUE

    Drain Plug Torque:

    10–14 ft-lbs (14–19 Nm)

  2. Add the recommended fluid (listed in the Gearcase Specification Chart) through the fill plug hole until the fluid is even with the bottom of the fill plug hole.

  3. Reinstall the fill plug. Torque to specification.

    TORQUE

    Fill Plug Torque:

    10–14 ft-lbs (14–19 Nm)

  4. Clean any fluid residue from around the drain and fill plugs.

  5. Dispose used fluid properly.

Parent topic: Transmission