en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Lamp Replacement

When servicing a halogen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. If fingers do touch a lamp, clean it with denatured alcohol.

CAUTION
Hot components can cause burns to skin. Allow lamps to cool before servicing.

  1. Remove the seven (7) headlight pod screws. Pull the pod cover forward.

  2. Unplug the headlamp from the wiring harness. Be sure to pull on the connector, not on the wiring.

  3. Turn the lamp counter-clockwise to remove it.

  4. Apply dielectric grease to the socket and install the new lamp. Make sure the tab on the lamp locates properly in the housing.

  5. Reassemble the pod.

Parent topic: Lights