en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Drive Belt Removal

DRIVE BELT REMOVAL (EBS MODELS)

  1. Position the vehicle on a level surface. Put the transmission in PARK (P) and lock the parking brake.

  2. Elevate and safely support the rear of the vehicle.

  3. Remove the seat.

  4. Remove the left side panel / footwell. See Side Panel / Footwell Removal.

  5. Loosen the PVT outlet duct clamp.

  6. Remove the 10 fasteners securing the outer PVT cover to the inner PVT cover.

  7. Using care, pull the outer PVT cover out the side of the vehicle.

  8. Note the orientation of the drive belt so that it can be installed in the same direction.

  9. Insert the Belt Removal Tool 1 (included in your vehicle’s toolkit) into the threaded hole on the driven clutch as shown and turn clockwise to spread the clutch.

  10. Carefully walk the belt off the driven clutch and remove from the drive clutch.

DRIVE BELT REMOVAL (NON-EBS MODELS)

  1. Position the vehicle on a level surface. Put the transmission in PARK (P) and lock the parking brake.

  2. Elevate and safely support the rear of the vehicle.

  3. Remove the seat.

  4. Remove the left side panel / footwell. See Side Panel / Footwell Removal.

  5. Loosen the PVT inlet duct clamps to remove the PVT inlet duct from the outer PVT cover.

  6. Loosen the PVT outlet duct clamps.

  7. Remove the 8 fasteners securing the outer PVT cover to the inner PVT cover.

  8. Using care, pull the outer PVT cover out the side of the vehicle.

  9. Note the orientation of the drive belt so that it can be installed in the same direction.

  10. Squeeze the belt in the center to spread the driven clutch sheaves.

  11. Carefully walk the belt off the driven clutch and remove from the drive clutch.

Parent topic: PVT System