en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Driving Through Water

NOTICE
Major engine damage can result if the vehicle is not thoroughly inspected after operation in water. Perform the services outlined in the Maintenance chapter. The following areas need special attention: engine oil, transmission fluid, demand drive fluid, and all grease fittings.

If the vehicle tips or overturns in water, or if the engine stops during or after operating in water, service is required before starting the engine. Your POLARIS dealer can provide this service. If it's impossible to bring the vehicle in before starting the engine, perform the service outlined in the Vehicle Immersion section of this manual, and take the vehicle in for service at the first opportunity.

Your ATV can operate through water with a maximum recommended depth equal to the bottom of the footrests.

Follow these procedures when operating through water:

  1. Determine water depths and current before entering water.

  2. Choose a crossing where both banks have gradual inclines.

  3. Avoid operating through deep or fast-flowing water.

  1. After leaving water, test the brakes. Apply them lightly several times while driving slowly. The friction will help dry out the pads.

If it’s unavoidable to enter water deeper than the footrest level:

  • Proceed slowly. Avoid rocks and obstacles.

  • Balance your weight carefully. Avoid sudden movements.

  • Maintain a steady rate of speed. Do not make sudden turns or stops. Do not make sudden throttle changes.

Parent topic: Driving Procedures