en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Update Software

NOTICE
Before updating the display, always export your existing rides and waypoints to a USB drive to avoid losing them.

To update the software, do the following:

Download Software onto your Personal Computer

  1. Go to ridecommand.polaris.com/display. Select the display that matches what is on your vehicle.

  2. Click the Update Software button.

  3. Save the file to a removable USB drive. It is recommended you use a USB drive with 32GB in exFAT® format.

Upload Software on your Vehicle

  1. Plug the USB drive into your vehicle’s USB cable and turn on the display. Note: ensure the USB is fully inserted into the port.

  2. Turn on your vehicle.

  3. On the display, press the Polaris icon button.

  4. In the right-hand corner, select All Settings.

  5. Select General.

  6. Select System Information.

  7. Select the file you want to install. "Newest" will be automatically displayed next to the newest version detected on the USB drive.

  8. The display will reboot and install the software.

Error Messages and Troubleshooting

If an error occurs while updating your software, perform one or all of the following actions to resolve the issue:

  • Remove and reconnect the USB flash drive securely.

  • Make sure the display files are not inside a folder on the flash drive.

  • Make sure only display files are on the flash drive. Remove any other files if necessary.

  • Try using a different USB flash drive.

  • Ensure the capacity of data on the USB drive is larger than 1GB and smaller than 64GB.

  • Re-format the flash drive to the correct format (FAT32 or exFAT®). Re-download the update(s) from the RIDE COMMAND website. Drag and drop the file(s) into the flash drive folder.