en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Fog the Engine

  1. Treat the fuel system with POLARIS Carbon Clean. See Stabilize the Fuel.

  2. Support the front end of the machine so the engine is level or tilted slightly rearward.

  3. Turn the fuel valve off.

  4. Remove the spark plug.

  5. Spray fogging oil into the cylinder.

  6. Slowly pull the recoil starter to turn the engine over two or three times.

  7. Reinstall the spark plug.

  8. Rotate the piston to bottom dead center (BDC) and

  9. Slowly pull the recoil starter handle until resistance is felt. Leave it in that position.

  10. Clean the engine thoroughly with an oiled cloth.

Polaris Fogging Oil

(12 oz aerosol can)

Part Number: 2870791

NOTICE
If POLARIS fuel system additive is not used, the fuel tank, fuel lines, and carburetor should be completely drained of gasoline. Observe all fire safety rules when draining the carburetor. Review the fuel-related warnings on Fuel. To eliminate any fuel remaining in the carburetor, run the engine until it stops.
Parent topic: Storage