Oil Change
-
Support the rear of the snowmobile slightly off the ground with an appropriate snowmobile support.
-
Place a drain pan under the drain plug 1.
-
Remove the drain plug.
-
Remove the dipstick 2 and wipe it dry with a clean shop towel.
-
Allow the oil to drain completely.
-
Reinstall the drain plug and sealing washer.
Drain Plug
10 ft-lbs (13.5 N·m)
-
Using a long funnel, pour recommended oil into the oil fill hole to specified capacity.
Engine Oil
20 floz (0.6 l)
-
Insert the dipstick into the oil fill hole completely, but do not thread it.
-
Remove the dipstick and inspect the oil level.
-
If oil level is below the lower mark on the dipstick, add additional recommended oil until the upper mark has been met.