en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Handlebar Adjustment

  1. Slide the handlebar pad upward to access the adjuster bolts. If additional room is required, unzip one of the handlebar pad zippers and roll the pad to the side.

  2. Remove the upper flange nut and carriage bolt 1.

  3. Loosen the lower flange nut 2 only enough so the bracket can move freely.

  1. Position the handlebar to the desired height.

  2. Reinstall the upper carriage bolt and tighten flange nut to specified torque.

    TORQUE

    Flange Nuts

    15–17 ft-lbs (20–23 N·m)

  3. Reinstall the handlebar pad.