en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Handlebar Component Torque Settings

IMPORTANT

Moving a handlebar component without first loosening its mounting screws may cut grooves into the handlebar, making it difficult to secure the component. Do not move a handlebar component without first loosening its mounting screws. Take care to avoid damaging hand warmer or brake switch wires when moving components.

Component

Torque

Do not over-tighten

1

Left Handlebar Control Block

 20 in-lbs (2.3 N·m)
2

Upper / Lower Riser Clamps

 14.8 ft-lbs (20 N·m)
3

Auxiliary Engine Stop Switch Set Screw

 12 in-lbs (1.4 N·m)
4

Throttle Lever Block Set Screw

 27 in-lbs (3.1 N·m)
5

Throttle Lever Block Cover Screws

 6 in-lbs (0.7 N·m)
6

Brake Lever / Master Cylinder
Torque the front screw first, then torque the screw next to the reservoir.

70 in-lbs (7.9 N·m)
Not Shown Hand Guard Mounts (if applicable) Hand-Tight
Not Shown Mountain Hoop Bar (if applicable) 10 ft-lbs (13.6 N·m)
Parent topic: Handlebar Settings