en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Throttle Block Alignment

  1. Slightly loosen the set screw 1 on the bottom of the housing.

  2. Move the control block to the desired position.

    NOTICE

    Take care to avoid damaging hand warmer wires when moving components.

  3. Tighten the screw to specification. Do not over-torque.

    TORQUE

    27 in-lbs (3 Nm)

  4. With the engine off, test throttle lever movement after tightening the screw. See Throttle Safety Switch.

Parent topic: Handlebar Settings