en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Oil Change

IMPORTANT
Always change the oil filter whenever changing oil.

See the fluid recommendation table for capacities and plug torques. Always change the oil and filter at the intervals outlined in the Periodic Maintenance Chart.

  1. Position the vehicle on a level surface.

  2. Start the engine. Allow it to warm up at idle for two to three minutes.

  3. Stop the engine.

  4. Clean the area around the drain plug 1.

  5. Place a drain pan under the crankcase.

  6. Remove the drain plug 1. Allow the oil to drain completely.

    CAUTION
    Hot oil can cause burns to skin. Do not allow hot oil to contact skin.

  7. Install a new sealing washer on the drain plug. The sealing surfaces on drain plug and crankcase should be clean and free of burrs, nicks or scratches.

  8. Reinstall the drain plug. Torque to specification.

    TORQUE
    11 +/- 1 ft-lbs (16 +/- 1.5 Nm)
Parent topic: Engine Oil