Turning Around on a Hill (K-Turn)
If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-Turn to turn around.
 
         
         - 
               
               Stop the vehicle. Keep your weight uphill. 
- 
               
               Always engage ADC mode (if equipped) before ascending or descending a hill. If ADC mode is not equipped, apply AWD mode before ascending or descending a hill. 
- 
               
               Lock the hydraulic parking brake. 
- 
               
               Leave the transmission in forward gear. Turn the engine off. 
- 
               
               Stay uphill of the vehicle and turn the handlebars full left. 
- 
               
               Squeeze the brake lever to release the parking brake. 
- 
               
               Slowly release the brake lever and allow the vehicle to roll around to your right until it's pointing across the hill or slightly downward. 
- 
               
               Lock the hydraulic parking brake. 
- 
               
               Remount from the uphill side. Keep your weight uphill. A passenger should not remount until the vehicle returns to firm, level ground. 
- 
               
               Apply the foot brake. 
- 
               
               With the transmission still in forward, start the engine. 
- 
               
               Squeeze and release the brake lever to release the parking brake. 
- 
               
               Release the foot brake and drive slowly downhill. Control speed with either the hand or foot brake until the vehicle is on level ground.