Lubrication Guide
Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart. Items not listed in the chart should be lubricated at the General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no additional lubrication will be needed. However, if these components are subjected to severe use, grease zerks have been provided for additional lubrication at the user's discretion.
|
Item |
Suggested Lubricant |
Capacity at Fluid Change |
Fill Plug Torque |
Drain Plug Torque |
REF. |
|---|---|---|---|---|---|
|
Engine Oil |
PS-4 5W-50 4-Cycle Oil |
1.9 l (2 qt.) |
– |
19-23 Nm (14-17 ft-lbs) |
|
|
Brake Fluid |
DOT 4 Brake Fluid |
– |
– |
– |
|
|
Transmission Oil |
AGL Gearcase Lubricant & Transmission Fluid |
946 ml (32 oz.) |
27-34 Nm (20-25 ft-lbs) |
27-34 Nm (20-25 ft-lbs) |
|
|
Demand Drive Fluid (Front Gearcase) |
Demand Drive Fluid |
275 ml (9.3 oz.) |
11–14 Nm (8–10 ft-lbs) |
15 Nm (11 ft-lbs) |
|
|
Rear Gearcase Oil |
ATV Angle Drive Fluid (or GL5 80–90 weight gear lube) |
210 ml (7.1 oz.) |
14–19 Nm (10–14 ft-lbs) |
14–19 Nm (10–14 ft-lbs) |
|
|
Front Prop Shaft Yoke |
U-Joint Grease |
Grease fitting (3 pumps maximum) every 800 km (500 miles), before long periods of storage, or after pressure washing or submerging. |
|||