Transmission (Main Gearcase)
Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart. Maintain the oil level even with the bottom thread of the fill plug hole.
Transmission Drain / Fill Plug:
14 ft-lbs (19 Nm)
Oil Check
The fill plug is located on the rear of the gearcase. Maintain the fluid level at the bottom of the fill plug hole.
To check the transmission fluid, do the following:
-
Position the vehicle on a level surface and turn off the engine.
-
Remove the fill plug 1.
-
Check the fluid level.
-
Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.
-
Reinstall the fill plug. Torque to specification.
Fluid Change
The drain plug is located on the bottom of the gearcase. Access the drain plug through the hole in the skid plate.
-
Insure the engine is off and remove the fill plug 1.
-
Place a drain pan under the drain plug 2.
-
Remove the drain plug. Allow the fluid to drain completely.
-
Clean and reinstall the drain plug. Torque to specification.
-
Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.
-
Reinstall the fill plug. Torque to specification.
-
Check for leaks. Discard used fluid properly.