Headlight Beam Adjustment
To adjust the headlight beam, do the following:
-
Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) from a wall.
-
Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.
-
Apply the brakes. Start the engine. Turn on the headlights.
-
Observe the headlight aim. The most intense part of the headlight beam should be aimed 8" (20 cm) below the mark placed on the wall. Include the weight of a rider on the seat while performing this step.
-
If a headlight needs adjustment, locate the adjustment screw at the back of the headlight.
-
Loosen the screw, adjust the headlight, and tighten the screw.
-
Repeat steps 4-6 until the lamp is properly adjusted.