Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating increases the risk of an accident. Always inspect the vehicle before each use to make sure it's in safe operating condition.
Item | Remarks | Page |
---|---|---|
Brake system/pedal travel | Ensure proper operation |
Brake Pedal
Brakes |
Brake fluid | Ensure proper level | Brakes |
Front suspension | Inspect, lubricate if necessary | Lubrication Recommendations |
Rear suspension | Inspect, lubricate if necessary | Lubrication Recommendations |
Steering | Ensure free operation | - |
Tires | Inspect condition and pressure | Tires |
Wheels/fasteners | Inspect, ensure fastener tightness | Tires |
Frame nuts, bolts, fasteners | Inspect, ensure tightness | - |
Fuel and oil | Ensure proper levels | Engine Oil |
Coolant level | Ensure proper level | Cooling System |
Coolant hoses | Inspect for leaks | - |
Throttle | Ensure proper operation | Throttle Pedal |
Indicator lights/switches | Ensure proper operation |
Ignition Switch/Light Switch
Indicator Lamps |
Intake pre-filters | Inspect, clean | - |
Headlamps | Check operation, apply POLARIS dielectric grease when lamp is replaced | Lights |
Brake light/tail lamps | Check operation | - |
Seat Latch | Push down on the seat back to ensure the latch is secure | - |
Seat Belt | Check length of belt for damage, check latches for proper operation | Seat Belts |
Cab Doors (If equipped) | Check doors and latches for wear or damage. | - |
Grass & Leaves | Remove grass, leaves, foreign matter, and other flammable material or debris, especially near the exhaust system. | - |