en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Battery Installation

  1. Install battery on battery tray with terminals facing front of vehicle.

  2. Reinstall the battery hold down strap fastener and torque to specification.

    TORQUE
    Battery Strap Fastener:
    8 ft-lbs (11 Nm)

  3. Attach battery cables to battery. Torque to specification.

    850 High Lifter: Attach positive red starter cable and red harness wire to the positive terminal, then black chassis ground to negative terminal with Battery Bolt Kit (PN 2201357).

    1000 High Lifter: Attach positive red starter cable, red harness wire, and red winch cable to the positive terminal, then black chassis ground and black winch ground to negative terminal with Battery Bolt Kit (PN 2201357).

    TORQUE
    Battery Terminal Fastener:
    6 ft-lbs (8 Nm)
    NOTE

    Ensure the cables are not pinched or kinked and make sure the cable orientation is such that the battery cover installs with no cable interference.

Parent topic: Battery