en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Handlebars

The handlebars can be adjusted for rider preference.

WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster block tightening bolts can cause limited steering or loosening of the handlebars, resulting in loss of control and serious injury or death. Follow the adjustment procedures exactly, or see your POLARIS dealer for service.

  1. Remove the pod.

  2. Loosen the four handlebar bolts.

  3. Adjust the handlebar to the desired height. Be sure the handlebars do not contact the gas tank or any other part of the machine when turned fully to the left or right.

  4. Torque the front two bolts to 14 ft-lbs (19 N·m), then torque the rear two bolts. A gap of up to 1/8 in (3 mm) will remain at the rear of the clamp blocks.

  5. Reinstall the pod.