en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Spare Belt Holder Removal

The spare belt holder 1 attached to the clutch guard. Use the following procedure to remove the spare belt holder from the snowmobile.

  1. Open the left compartment door panel.

  2. Rotate the 1/4 turn fastener 2 at the top of the spare belt holder.

  3. Slide the spare belt holder outward to release it from the mount 3 on the footrest.

    NOTICE

    Fender has been removed for image clarity.

  4. Lift upward and remove the spare belt holder.

  5. Reinstall the drive belt into the spare belt holder

  6. Install and align spare belt holder mounting points.

  7. Slide the spare belt holder inward to secure it to the mount on the footrest.

  8. Rotate the 1/4 turn fastener to secure the spare belt holder.