en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Drive Belt Removal

  1. Stop the engine after operating in a forward motion.

  2. Turn the ignition key off. Wait for the engine to come to a complete stop.

  3. Rotate the driven clutch counter-clockwise 1/4 turn by hand to ensure forward engagement.

  4. Lock the temporary brake lock.

  5. Remove the left side panel.

  6. Remove the spare belt holder.

  7. Retrieve the L-wrench 1. Install the wrench into the open threaded hole in the outer sheave of the clutch.

  8. Turn the wrench clockwise until the sheaves open far enough to remove the belt.

  9. Firmly grasp the belt 2 midway between the clutches and pull upward and rearward to remove it from the driven and then drive clutch.

Parent topic: Clutch System