en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Fluid Change

The drain plug 1 is located on the bottom of the gearcase. Access the drain plug through the drain hole in the skid plate.

  1. Remove the fill plug.

  2. Place a drain pan under the drain plug.

  3. Remove the drain plug. Allow the fluid to drain completely.

  4. Clean the drain plug.

  5. Reinstall the drain plug. Torque to specification (listed in the Gearcase Specification Chart of this manual).

  6. Add the recommended fluid (listed in the Gearcase Specification Chart) to the bottom of the fill plug hole. Do not overfill.

  7. Reinstall the fill plug. Torque to specification (listed in the Gearcase Specification Chart).

  8. Check for leaks. Discard used fluid properly.