Oil Check
Always check the oil when the engine is cold. If the engine is hot when the oil is checked, the level will appear to be overfull.
Access the oil check dipstick 1 through the right rear wheel well. Access the oil fill cap 2 through the service access panel on the floor of the cargo box.
-
Position the vehicle on a level surface.
-
Place the transmission in PARK.
-
Start the engine. Allow the engine to idle for 30 seconds.
-
Stop the engine. Wait two (2) minutes to allow oil to drain back to the sump.
-
Remove the dipstick. Wipe it dry with a clean cloth.
-
Reinstall the dipstick completely. Remove the dipstick and check the oil level.
-
Remove the oil fill cap to add the recommended oil as needed. Maintain the oil level between the minimum and maximum marks on the dipstick. Do not overfill.
-
Reinstall the fill cap. Reinstall the dipstick.