Fuse / Relay Center
If the engine stops or will not start, if the power steering stops working (if equipped), or if you experience other electrical failures, a fuse may need replacement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. The fuse/relay center 1 is located below and to the left of the steering wheel. The fuse for the engine cooling fan is an external fuse in a holder on top of the fuse box.
| Label | Value | Function |
|---|---|---|
|
FAN |
50A Fuse (separate fuse holder, on top of fuse box) |
Engine Cooling Fan |
|
FAN (Turbo S 2-seat only) |
30A Fuse |
Engine Cooling Fan |
|
WATER |
7.5A Fuse |
Water Pump |
|
FUEL |
7.5A Fuse |
Fuel Pump |
|
FUEL (EVAP ONLY) |
10A Fuse |
Fuel Pump |
|
TERM ACCY |
10A Fuse |
Terminal Block Accessory |
|
INSTR ACCY |
7.5A Fuse |
Diagnostic Accessory, Interior LED Light, Display Accessory (optional) |
|
INSTR ACCY (Turbo S only) |
15A Fuse |
Diagnostic Accessory, Interior LED Light, Display Accessory (optional), Audio |
|
SOCKET |
10A Fuse |
Socket |
|
EPS |
30A Fuse |
Power Steering |
|
SCM (Turbo S only) |
7.5A Fuse |
Suspension Control Module (SCM), Shocks Relay Coil |
|
SHOCKS (Turbo S only) |
7.5A Fuse |
Shocks |
|
INST UNSW |
7.5A Fuse |
Display (optional), Gauge, Diagnostic |
|
LIGHTS |
7.5A Fuse |
Headlights, Taillights, Accent Lights (optional), Brake Lights |
|
CHASSIS |
7.5A Fuse |
AWD Switch Light, Oxygen Sensor Heater, EPS Wake-Up, Vehicle Speed Sensor, Seat Belt Switch, SCM Wake-Up (optional), SCM Mode Switch (optional), AWD Coil, Gauge, Waste Gate |
|
EFI |
10A Fuse |
Accessory Relay Coil, ECM Wake-Up, Pump Relay Coil, Chassis Relay Coil, Start Relay Coil, EFI Relay Coil, Injectors, SCM Relay Coil (optional), Lights Relay Coil, Ignition Coil, Starter Solenoid Coil, Brake Relay Coil |