Demand Drive Fluid Change

The demand drive drain plug 2 is located on the bottom of the gearcase.

1. Position the vehicle on a level surface.

2. Remove the fill plug with a 8 mm Allen wrench.

3. Place a drain pan under the drain plug.

4. Remove the drain plug with a 8 mm Allen wrench.

5. Clean the drain plug.

6. Reinstall the drain plug. Torque to specification.

   TORQUE

   Drain Plug Torque:

   8–10 ft-lbs (11–14 Nm)

7. Add the recommended fluid (listed in the Gearcase Specification Chart) through the fill plug hole until the fluid is even with the bottom of the fill plug hole.

8. Reinstall the fill plug. Torque to specification.

   TORQUE

   Drain Plug Torque:

   8–10 ft-lbs (11–14 Nm)

9. Clean any fluid residue from around the drain and fill plugs.

10. Dispose used fluid properly.