Handlebar Component Fastener Torques
| Component | Torque Do not over-tighten |
|---|---|
|
IMPORTANT: Moving a handlebar
component without first loosening its screws/set screws may cut grooves
into the handlebar, making it difficult to secure the component. Do
not move a handlebar component without first loosening its mounting
screws/set screws.
Take care to avoid damaging hand warmer/brake switch wires when moving components. |
|
| Left Hand Control/Brake Master Cylinder | 24 in-lbs (2.7 Nm) |
| Upper / Lower Handlebar Clamps | 7 ft-lbs (9.5 Nm) |
| Throttle Lever Block Set Screw | 35 in-lbs (4 Nm) |
| Throttle Lever Block Cover Screws | 6 in-lbs (0.7 Nm) |
| Auxiliary Engine Stop Switch Set Screw | 12 in-lbs (1.4 Nm) |
| Hand Guard Mounts (if applicable) | Hand-Tight |