en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Left Hand Control Alignment

  1. Loosen the four control block mounting screws.

    CAUTION
    Take care to avoid damaging hand warmer/brake switch wires when moving components.

  2. Move the control block to the desired position.

    NOTICE
    If the control is loose and was inadvertently moved without loosening the screws, move the control block slightly to the left or right to relocate the pins.

  3. Tighten the screws to specification in the sequence shown in the image. Do not over-torque.

TORQUE

Control Block Mounting Screws

24 in-lbs (2.7 N·m)