Hydraulic Brake Inspection
Inspect the brake lever reserve before each use of the snowmobile. See Brake Lever Travel.
Brake pads must be replaced when the brake pad material becomes thinner than the backing plate (approximately 1/16 inch or 1.5 mm). A kit is available for replacing brake pads. See your dealer.
WARNING
Brake failure during operation can result in
serious injury or death. Properly functioning brakes are vital to
your safety. Be sure the brake pads do not drag on the disc and that
brake lever travel is not excessive. Always replace brake pads when
the brake pad material becomes thinner than the backing plate (approximately
1/16 inch or 1.5 mm).