en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Information Display Mode

This area will display clock, odometer, trip meter, state of charge (SOC), range meter, efficiency rate (EFF) or any existing fault codes or warning messages.

The display can be changed to show either standard or metric units of measurement for each of the following settings.

 

Standard Display

Metric Display

Distance

Miles

Kilometers

Temperature

Fahrenheit

Celsius

Time

12-Hour Clock

24-Hour Clock

  1. Turn the key to the OFF position.

  2. Press and hold the MODE button while turning the key to the ON position.

  3. When the display flashes the distance setting, tap the MODE button to advance to the desired setting.

  4. Press and hold the MODE button to save the setting and advance to the next display option.

  5. Repeat the procedure to change remaining display settings.

NOTICE
To exit the set-up mode, turn the key off. Wait 5 seconds, then turn the key on. The gauge displays the mode that was displayed prior to setting the units.

Clock Resetting

NOTICE
The clock must be reset any time the batteries have been disconnected or fully discharged.

  1. Turn the key to the ON position. Use the MODE button to toggle to the clock display.

  2. Press and hold the MODE button until the hour segment flashes. Release the button.

  3. With the segment flashing, tap the MODE button to advance to the desired setting.

  4. Press and hold the MODE button until the next segment flashes. Release the button.

  5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the 1-minute segment, step 4 will save the new settings and exit the clock mode.

  6. Turn the key to the OFF position.

Odometer

The odometer displays the distance traveled by the vehicle since manufacture.

Trip Meter

The trip meter displays distance traveled since the last reset of the trip meter. To reset, toggle to the trip meter display. Press and hold the MODE button until the meter resets to zero.

Battery State of Charge

This mode displays the remaining system voltage level in percentage format.

Range Meter

The range meter displays the approximate distance the vehicle could travel on the remaining battery voltage level.

Efficiency Rate (EFF)

This mode displays the rate at which electrical power (Wh) is consumed per mile or per kilometer. A higher number indicates less desirable efficiency. A lower number indicates better efficiency.

AC Meter

This mode displays the amount of Kilowatts that the vehicle has charged on in its life. This feature is available for vehicles equipped with a standard charger, but may not be available for vehicles equipped with the Fast Charger option.