en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Wheel Removal

WARNING
A falling vehicle can cause serious injury or death. Never place any part of your body under an elevated vehicle. If you need access to the bottom of the vehicle, use automotive jack stands to support the vehicle on a firm, level surface. Your authorized GEM dealer can assist.

  1. Position the vehicle on a dry, firm, level surface.

  2. Set the park brake.

  3. Turn the key off.

  4. Block both the front and rear of the tire that is located diagonally opposite the jacking position. For example, if the right front tire is being changed, block the left rear wheel.

  5. Use a small floor style jack or low profile scissors jack only. Jack the vehicle only from the side of the vehicle, on the main frame rail, at the point where the tub or floor panel support and the main frame rail are welded 1 . Alternative locations include the rear frame rail and the center of the front cross member.

  6. Remove the wheel nuts and cone washers (for vehicles with factory steel wheels).

  7. Remove the wheel.

NOTICE
Jacking at any location other than the recommended jacking points may cause significant damage to the vehicle frame and body.

Parent topic: Tires