Fast Charge Receptacle
The following information applies to use of the fast charge receptacle. See Batteries section in the Features and Controls Section for information that applies to the use of the standard charge receptacle.
NOTICE
Enhanced standard charge cord will not insert into the
fast charge receptacle and damage may occur if forced.
-
Always use SAE J1772 approved charge stations and connectors.
-
To begin charging, align and insert the charge station connector into the receptacle until it latches.
-
The lights on the charge station will indicate charging when the connection is made.
-
To remove the connector after the charge cycle is complete, press the release button and pull the connector out.