Driving Procedure
- 
                  
                  
Disconnect the charging cable.
 - 
                  
                  
Sit in the driver's seat and fasten the seat belt. Make sure passengers are seated with seat belts secured.
 - 
                  
                  
Adjust mirrors as needed.
 - 
                  
                  
Turn the key clockwise to the ON position.
 - 
                  
                  
Apply the brakes.
 - 
                  
                  
Release the park brake.
 - 
                  
                  
Move the direction switch to the desired position.
 - 
                  
                  
Check your surroundings and determine your path of travel.
 - 
                  
                  
Keeping both hands on the steering wheel, release the brake pedal and gradually push the accelerator toward the floor to begin driving.
 - 
                  
                  
Drive slowly. Practice maneuvering and using the accelerator and brakes on level surfaces.
 - 
                  
                  
Before turning, activate a turn signal to alert others of your intentions.
 - 
                  
                  
Do not carry a passenger until you have at least two hours of driving experience with this vehicle. Allow a passenger to ride only in a designated passenger seat with seat belt secured.
 - 
                  
                  
To stop the vehicle, release the accelerator pedal completely and brake to a complete stop.
NOTICEAlways bring the vehicle to a complete stop before changing the position of the direction switch. - 
                  
                  
Set the park brake.
WARNINGA rolling vehicle can cause serious injury or death. Always set the park brake when leaving the vehicle unattended. - 
                  
                  
Turn the key off.
 - 
                  
                  
Recharge the batteries daily, or after each use of the vehicle.