Ignition Switch
The ignition switch 1 is a four-position, key-operated switch. Use the ignition switch to start the engine. See the Starting the Engine section for starting procedures.
| Position | Function |
|---|---|
| OFF | The engine is off. Electrical circuits are off, except accessory 12V. |
| ACCESSORY | The engine is off. Powers the display, terminal block, and front/rear accent lights. Check engine and power steering warning indicators will appear on the display in this mode but will turn off when the vehicle is started if no issues are present. |
| ON | Electrical circuits are on. Electrical equipment can be used. |
| START | The vehicle must be in PARK or NEUTRAL before the engine can start. To start the vehicle, press the brake pedal, turn the key to the start position, and then release. The engine will turn over for about 5 seconds or until started. |
The key can be removed from the switch when it is in the OFF position.