en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Beam Adjustment

The headlight beam can be adjusted slightly upward or downward and to the left or right.

  1. Position the vehicle on a level surface. The headlight should be approximately 25 ft. (7.6 m)1 from a wall.

  2. Measure the distance from the floor to the center of the headlight 3 and make a mark on the wall at the same height.

  3. Apply the brakes. Start the engine. Place the transmission in PARK. Turn the headlights to high beam.

  1. Include the weight of a rider on the seat while performing this step. Observe the headlight aim. As a starting point, the most intense part of the headlight beam should be 2 inches (5 cm) 2 below the mark on the wall. Adjust to operator preference.

  2. Tighten or loosen the two (2) headlight screws 4 to adjust the beam upward or downward or to the left or right.