en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Spark Arrester

WARNING

Improper service of the spark arrester could result in serious injury or death.

  • Never operate the vehicle without the spark arrester.

  • Do not perform service on the spark arrester while the system is hot. Exhaust system temperatures can reach extreme temperatures. Allow components to cool sufficiently before proceeding.

  • Wear eye protection and gloves while servicing.

Periodically clean the spark arrester to remove accumulated carbon. A plugged spark arrester will affect engine performance. Clean daily when driving in mud and water. Replace a cracked or damaged arrester before operating.

To service spark arrester:

  1. Turn off engine and allow exhaust system to cool.

  2. Remove the arrester retaining bolt 1.

  3. Use a non-synthetic brush to clean the arrester screen. A synthetic brush may melt if components are warm. If necessary, blow debris from the screen with compressed air.

  4. Inspect the screen for wear and damage. Replace a worn or damaged screen.

  5. Reinstall the arrester. Torque bolt to specification.

    TORQUE

    Spark Arrester Retaining Bolt:

    8 ft-lbs (11 N⋅m)