|
1 Check Engine |
|
This lamp illuminates when the ECM detects a Diagnostic Trouble
Code in the engine management system. Do not operate the vehicle if
this warning appears. Serious engine damage could result. Your authorized
POLARIS dealer can assist. |
|
2 EPS Warning |
|
This lamp illuminates to indicate that EPS has shut down. EPS
shuts down automatically 5 minutes after the engine is turned off
if the key remains in the ON position. Turn the key off and on to
reset the unit. If the light remains on after starting the engine,
the EPS system is inoperative. Your POLARIS dealer can assist. |
|
3 Engine Hot |
|
This lamp illuminates to indicate an overheated engine. If
the indicator flashes, a severe overheating condition exists. |
|
4 Neutral |
|
This lamp illuminates when the transmission
is in neutral and the ignition key is in the ON position. |
|
5 Helmet/Seat Belt |
|
This lamp flashes for several seconds when the key is turned
to the ON position. The lamp is a reminder to wear a helmet and your
seat belt. |
|
6 High Beam |
|
This lamp illuminates when the headlamp switch is set to high
beam. |
|
7 Brake Failure (if equipped) |
|
This lamp illuminates when the brake system detects low pressure
in the brake hydraulic system. |
|
8 Trailer Indicator |
|
This lamp illuminates when the trailer turn signals are active. |
