en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Headlight Adjustment

The headlight beams are adjustable.

  1. Place the vehicle on a level surface with the headlight approximately 25 ft. (7.6 m) 3 from a wall.

    NOTE
    Ensure the tire pressure for all four tires are at recommended levels.

    ITEM DESCRIPTION
    1 Measure Distance = 7.5 in (19.0 cm)
    2 Measure Distance = 25 ft (7.6 m)
    3 Headlight Center of Bulb

  2. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height.

  3. With the machine in PARK, start the engine and turn the headlight switch to the LOW position.

  4. The most intense part of the LOW beam headlight beam should be aimed 7.5 in. (19.0 cm) 1 below the mark placed on the wall.

    NOTICE
    Rider weight must be included in the seat while performing this procedure.

  5. Adjust the beam to the desired position by loosening or tightening the adjustment screws and moving the lamp to the appropriate height.

  6. Tighten Headlight adjustment screws 1 to adjust the beam to desired position. Repeat the procedure to adjust the other headlight.

    WARNING
    Due to the nature of light utility vehicles and where they are operated, headlight lenses become dirty. Frequently washing is necessary to maintain lighting quality. Riding with poor lighting can result in severe injury or death.
Parent topic: Lights