en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Oil Check

To check the oil, do the following:

  1. Position vehicle on a level surface and place the transmission in PARK.

  2. Stop the engine and allow it to cool down before removing the dipstick.

  3. Raise the cargo box. Remove the dipstick 1 and wipe it dry with a clean cloth.

  4. Reinstall the dipstick and push it into place.

    NOTE

    Make certain the dipstick is inserted all the way into the dipstick tube to keep the depth of the dipstick consistent.

  5. Remove the dipstick and check the oil level.

  6. Add the recommended oil as necessary to bring the oil level within the SAFE range on dipstick. Do not overfill.

    NOTE

    A rising oil level between checks during cold weather operation can indicate contaminants such as gas or moisture collecting in the crankcase. If the oil level is over the upper mark, change the oil immediately.

  7. With the cargo box raised, add engine oil through the oil fill cap 2 located on top of the valve cover, under the cargo box.

  8. When finished, reinstall the dipstick. Lower the cargo box and secure in position.

    TIP
    Be sure to check around and under the engine for signs of oil leakage.
Parent topic: Engine Oil