Seat Belts
This vehicle is equipped with three-point lap and diagonal seat belts for the operator and passengers. Always make sure the seat belts are secured for all riders before operating. This vehicle is equipped with an Operator Presence Control system that will sound a beeper if the ignition is on, the park brake is off, and the seat belts are not fastened.
To wear the seat belt properly, follow this procedure:
-
For 3-point belts, pull the seat belt latch 1 downward and across your chest toward the buckle at the inner edge of the seat. The belt should fit snugly across your hips and diagonally across your chest. Make sure the belt is not twisted.
-
Push the latch plate 1 into the buckle 2 until it clicks.
-
Release the strap, it will self-tighten.
-
To release the seat belt, press the square red button in the buckle’s center.