en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Transmission (Main Gearcase)

Always check and change the fluid at the intervals outlined in the Periodic Maintenance Chart beginning on Maintenance Chart. Polaris recommends the use of AGL Gearcase Lubricant & Transmission Fluid for this vehicle.

Fluid Check

The fill plug 1 is located on the rear of the gearcase. The drain plug 2 is located on the bottom of the gearcase. Access the fill plug through the left rear wheel well. Maintain the fluid level at the bottom of the fill plug hole threads.

  1. Position vehicle on a level surface.

  2. Remove fill plug.

  3. View oil level through the fill hole.

  4. Add recommended fluid as needed.

  5. Reinsert the fill plug.

Fluid Change

  1. Position vehicle on a level surface.

  2. Remove fill plug.

  3. Place a drain pan under the drain plug.

  4. Remove the drain plug. Allow the fluid to drain completely.

  5. Clean the drain plug.

  6. Reinstall the drain plug with a new o-ring. Torque to 14 ft. lbs. (19 Nm).

  7. Add recommended oil. Maintain oil level at the bottom of the fill plug hole threads.

  8. Reinsert fill plug.

  9. Check for leaks.

  10. Discard used fluid properly.

Gearcase Capacity
Outlaw 110 11.8 oz. (350 ml)
Sportsman 110 11.8 oz. (350 ml)