en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Daytime Running Lights (if equipped)

If the daytime running lights do not operate, replace the lamps. It is recommended you install replacement lamps obtained from your authorized Polaris dealer.

  1. Remove the front cover (OUTLAW only).

  2. Disconnect the lights from the harness.

  3. Remove the rubber cover from the back of the light assembly.

  4. Press the lamp retainer inward and turn it counter-clockwise to remove it. Note position of the lamp positioning tab, then carefully pull the lamp out.

  5. Install the new lamp. Make sure the filament is horizontal.

  6. Reinstall the lamp retainer. Press the retainer inward and turn it clockwise about 1/4 turn.

  7. Start the engine to make sure the lights come on. If the lights do not operate, see your POLARIS dealer for service.

  8. Reinstall the rubber cover, and reconnect the lights to the harness.

  9. Reinstall the front cover (OUTLAW only).

Parent topic: Lamp Light Replacement