en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Battery Installation and Connections

Always install a fully charged battery. Using a new battery that has not been fully charged can damage the battery and result in a shorter life. It can also hinder vehicle performance. If recharging is necessary, use a .5 amp battery charger

  1. Set the battery in its holder.

  2. Coat the terminals with dielectric grease or petroleum jelly.

  3. Connect and tighten the red (positive) cable first.

  4. Connect and tighten the black (negative) cable last.

  5. Attach the hold-down strap.

  6. Verify that cables are properly routed.

Parent topic: Battery