en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Starting the Engine

NOTICE
Operating the vehicle immediately after starting could cause engine damage. Allow the engine to warm up for several minutes before operating the vehicle.

Follow the steps below for proper engine start procedure:

  1. Shift the transmission to neutral.

  2. Lock the parking brake.

  3. Sit on the vehicle. Attach the tether strap to the ATV and to your wrist.

  4. Push the engine stop switch up to the ON position.

  5. Turn the ignition key to ON.

  6. Squeeze the rear brake lever and press the start button. The rear brake lever must be engaged or the engine won’t start.

  7. Do not press the throttle while starting the engine. Activate the starter for a maximum of five seconds, releasing the button when the engine starts. If it doesn’t start, release the starter, wait five seconds, then activate for another five seconds. Repeat until the engine starts.