en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Charging Your Vehicle

Follow the procedure below to charge your vehicle.

IMPORTANT
Make sure the charge port cover and charge compartment door are fully secured before operating. Operating the vehicle with either left open may allow dirt and debris to damage the terminals.

  1. Stop the vehicle on a flat surface.

  2. Set the gear selector to PARK (P).

  3. Turn the key switch to OFF.

  4. Open the charge compartment door 1.

    NOTE
    Make sure to wipe away any accumulated mud or debris in or around the charge compartment. Do not use tools to clean terminals. Use compressed air, cloth, or (if necessary) low pressure water to clean the charge compartment.

  5. Open the charge port cover 2.

  6. Insert the EVSE charging plug into the charger socket until you hear an audible “click” sound. Once the vehicle begins charging:

    • The vehicle display will switch to the charging screen.

    • The vehicle will charge continuously until fully charged.

    • The vehicle will not be driveable while EVSE charging plug is connected.

    • Charge performance may vary as a result of ambient temperatures affecting internal battery temperature. See Charging in Extreme Ambient Temperatures for details.

  7. Once ready to resume operation, remove the EVSE charging plug.

  8. Reattach the charge port cover and close the charge compartment door.

Parent topic: Charging Best Practices