en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

12V Battery Installation

  1. Ensure that the battery is fully charged.

  2. Place the battery in the battery holder.

  3. Coat the terminals with dielectric grease or petroleum jelly.

  4. Connect and tighten the red (positive) cable first.

  5. Connect and tighten the black (negative) cable last.

  6. Install the battery hold-down strap and tighten the screws.

  7. Verify that cables are properly routed.

  8. Reconnect the high-voltage service disconnect loop. See Disconnecting High Voltage Power for details.

  9. Reinstall the seat and storage bin.

Parent topic: 12V Battery Maintenance and Charging