Indicator Lamps
| Indicator | Icon | Function |
|---|---|---|
| Vehicle Speed |
|
When standard mode is selected, speed displays in miles per hour. |
|
When metric mode is selected, speed displays in kilometers per hour. | |
| High-Voltage Battery Pack |
|
This indicator illuminates when a failure or fault has occurred in the vehicle’s high-voltage battery pack. |
| Check 12V Battery |
|
This indicator illuminates when the 12V battery is exhibiting low voltage. |
| Over Temperature |
|
This indicator illuminates when components of the electronic powertrain (such as the motor or high-voltage battery) are overheating. Continued operation may result in reduced performance to allow powertrain component temperatures to recover. |
| EPS Warning (if equipped) |
|
This indicator illuminates briefly when the key is turned to the ON position. If the light remains on, the EPS system is inoperative. See your dealer or other qualified person as soon as possible for repair. Continued operation could result in permanent damage to the EPS unit and increased steering effort. |
| Amber Warning Light (AWL) |
|
This indicator illuminates when an error condition or minor
fault has been detected by the vehicle’s computer. Consult Diagnostic Trouble Codes and Diagnostic Trouble Codes to identify the condition/fault detected. See your dealer or other qualified person if the condition/fault persists. |
| Malfunction Indicator Light (MIL) |
|
This indicator illuminates when an error condition or serious
fault has been detected by the vehicle’s computer. Consult Diagnostic Trouble Codes and Diagnostic Trouble Codes to identify the condition/fault detected. See your dealer or other qualified person if the condition/fault persists. |
| Helmet/Seat Belt |
|
This indicator illuminates as a reminder to the operator to ensure all riders are wearing helmets and seat belts before operating. The driver’s seat belt is equipped with a seat belt interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not secured. |
| High Beam |
|
This indicator illuminates when the headlamp switch is set to high beam. |
| Park Brake (if equipped) |
|
This indicator illuminates when the Park Brake is applied (if equipped). |
| Speed Limitation Indicator |
|
This indicator illuminates when the Speed Limitation function is active. |
| Active Status Indicator |
|
This indicator illuminates when the vehicle accelerator pedal is active. Pressing on the accelerator pedal when this light appears will result in movement in the direction selected (forward or reverse). |
| Charging Indicator |
|
This indicator illuminates to confirm the vehicle is connected to a charger. It does not confirm the flow of charge to the vehicle, which is only confirmed by text on the Rider Information Center or the Ride Command display (if equipped). If this light flashes, an error has occurred and the vehicle will not charge. |
| Brake Failure Indicator (International Models Only) |
|
This indicator illuminates when a brake fault or failure has occurred. |
| Overspeed Indicator |
|
This indicator illuminates when the vehicle’s Speed Limitation function is active and the vehicle travels at speeds in excess of the set limitation (such as when moving downward on a hill). |
| Cold Temperature Indicator |
|
This indicator illuminates when vehicle components are below their ideal operating temperature; 32° F (0° C). The vehicle may experience reduced performance when this light is active. Allow the battery heaters several minutes to warm up before operating. See Charging in Extreme Ambient Temperatures for details on extreme weather operation. |