en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Taillights/Brake Lights Replacement

Procedure to replace taillights:

All Models Except X2:

  1. Remove the harness connector from the back of the light assembly.

  2. Turn the lamp counter-clockwise to remove it.

  3. Apply dielectric grease to the socket and install the new lamp.

  4. Reinstall the harness connector.

  5. Test the light for proper operation.

X2:

  1. Open the tailgate.

  2. Remove the two screws near the tailgate latch.

  3. Grasp the entire taillight assembly and pull it away from the vehicle.

  4. Remove the harness connector from the back of the light assembly.

  5. Turn the lamp counter-clockwise to remove it.

  6. Apply dielectric grease to the socket and install the new lamp.

  7. Reinstall the harness connector.

  8. Test the light for proper operation.

  9. Reinstall the taillight assembly.

  10. Reinstall the two screws.

Parent topic: Lights