en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Transmission Oil

TORQUE
Fill Plug: 20–25 ft lbs. (27–34 Nm)

Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart. See the Fluid Recommendation table for capacities and plug torques. Maintain the oil level at the bottom of the fill plug hole. The fill plug is located on the right side of the ATV behind the footwell. The drain plug is located on the bottom rear side of the gearcase.

Oil Check

  1. Remove the fill plug 1. Check the oil level.

  2. Add the recommended fluid as needed to bring the level to the bottom of the fill hole threads.

  3. Reinstall the fill plug. Torque to specification.

  4. Reinstall the footwell.

Oil Change

TORQUE
Drain Plug: 20–25 ft lbs. (27–34 Nm)

  1. Place a drain pan under the gearcase. Remove the drain plug 2. Allow the oil to drain completely.

  2. Clean and reinstall the drain plug. Torque to specification.

  3. Remove the fill plug. Add the proper amount of the recommended oil.

  4. Reinstall the fill plug. Torque to specification.

  5. Check for leaks.

  6. Reinstall the footwell.

  7. Dispose of used oil properly.