en
IMPORTANT

The Owner's Manual for this vehicle contains warnings, instructions and other information you must read and fully understand before safely riding or performing maintenance on this vehicle. Always follow the warnings and instructions in Owner's Manual.

Click the link above for the Table Of Contents, or download a full PDF of the Owner Manual in the Owner Support area of Polaris.com.

Drive Belt Removal

  1. Position the vehicle on a level surface and place the transmission in PARK.

  2. Elevate and safely support the rear of the vehicle.

  3. Remove the left rear wheel from the vehicle.

  4. Remove the (4) bolts 1 retaining the lower LH frame support 2 and remove from the frame.

  1. Remove the rear skid plate.

  2. Remove the seat.

  3. Remove the (11) fasteners securing the outer PVT cover to the inner PVT cover.

  1. Using care, pull the outer PVT cover out the bottom of the chassis.

    NOTICE

    Flexing the PVT outlet duct aids PVT cover removal.

  2. Note the orientation of the drive belt so that it can be installed in the same direction.

  3. Insert the provided clutch tool between the slides and rotate the tool to spread the sheaves.

    Spanner Wrench / Spreader:

    PN 2877408

    NOTICE

    Make sure the tool is square with the moveable sheave surface of the driven clutch.

  4. Once the sheaves have been spread, walk the drive belt out of the driven clutch and drive clutch, and remove it from the vehicle.

Parent topic: PVT System